Tom Buck

OBSBOT Tail 2

cited in 4 videos · Mixed — said both good and bad

“I also do have the Obsot Tail 2. We just set it on this desk right here. And this was able to be also a center ice camera which worked pretty well except in this case when we were going over here was kind of shooting through this corner and that was sort of blocking the tracking.”

Sony A7S III

$3,998.00 · cited in 3 videos

“So when the action is over there is the camera you're looking at me on right now which is the A7S3 and that one has a 24 to 70 which is actually probably the ideal lens to use for this right now in this setup because we're kind of compact and cramped.”

Sony FX3

$4,298.00 · cited in 3 videos

“So, here's the Sony FX3 with the 70 to 200, and that was basically getting this half of the ice over here.”

GoPro Mission 1 Pro

cited in 2 videos · strongly positive

“All the way up to well, this one, which is the Mission Pro ILS interchangeable lens system GoPro, which is a GoPro that I literally have to manually focus because I'm using a cinema lens on it.”

DJI Osmo Pocket 3

$439.00

“DJI Osmo Pocket 3”

“Okay, so now we're just back to the FX3 over here.”

Sony A7 V

$2,898.00

“Sony a7V”

YoloCam S7 Webcam w/ 16mm Lens

$799.00 · strongly positive

“The first one is the Yoloam S7. It's a nice micro four/ thirds webcam. And this is going to be the commentator camera, the announcer camera, which is going to be me for today.”

YoloCam S3 Webcam

$199.00

“YoloCam S3 Webcam”

Sony FE 70-200mm f/2.8 GM OSS

$2,148.00 · cited in 2 videos

“This camera, the Sony FX3, has a long lens on it, which I might switch out throughout the game. Right now, it's got the 70 to 200.”

Sony FE 24-70mm f/2.8 GM II

$2,448.00 · positive

“Dark Team carries the puck through center ice into the zone, as you can see on Heather's camera, which is the Sony A7S3 with the 24 to 70 lens off the pipe.”

Sony FE 16-35mm f/2.8 GM II

$2,598.00 · positive

“In this case, it has the 16 to35 lens on it, which is super wide.”

Panasonic Lumix 25mm F1.7

$299.99

“Lumix 25mm (for S7)”

“Sony 70-200”

Tamron 20-40mm f/2.8 Di III VXD Lens for Sony E-Mount

$699.00

“Tamron 20-40 2.8”

Elgato Prompter

$299.99 · cited in 2 videos

“And here is my replacement Elgato Prompter after the casualty of the other one.”

YoloBox Extreme

$2,299.00 · cited in 2 videos · strongly positive

“The Yolo Box Extreme, of course, at the core of it, running everything into a 4K recording, which could have been a live stream, but we're just recording it today.”

“And same goes with the super clamp that I use for my camera, that's just fine as well.”

“Just for reference, in my PC back here, I have the Elgato CamLink Pro, which is a four HDMI 4K capture card. It's awesome. I love it.”

“Rodecaster Video”

“So, right now, everything you're seeing and hearing is being run through the Roadcaster video, and it is in 4K, and you don't need to 4K over any more cash to make that possible, because that is a free firmware update for all three of the Roadcaster videos.”

“So, this is just a long selfie stick for Insta 360 cameras. It's what is it like 8 feet, 10 feet tall, something like that.”

“Sony DJI Hot Shoe Adapter”

“This is just a Samson desk stand, MD5, I think.”

DJI Mic Mini

$99.00 · cited in 2 videos

“And then finally just for fun but also because it's kind of relevant I did actually want to compare the PD2 the this microphone to the DJI Mic Mini.”

RODE NT1 Signature Series

$159.00 · cited in 2 videos · strongly positive

“The NT1 is one of my favorite microphones cuz it just sounds so amazing.”

“And now again, just using the simple setups of 4K webcams with the Tiny 3, nice little microphones with the Obsot Vox microphones that are just paired directly to the camera, so we didn't have to deal with receivers or other connectors or adapters or anything.”

Sony ECM-B1M Digital Shotgun Microphone

$388.00

“And then this camera does have the Sony ECM B1M microphone on it, which is just to get some natural sound.”

Fifine AM8 Microphone + Boom Arm

$84.34 · Mixed — said both good and bad

“And this is the Fifine AM8, which has an MSRP of $58. And I got mine I think for $35.”

“If you've seen, you know, like this is the Hollyland A1.”

“Lewitt LCT 240 Pro”

“Sennheiser MKH 50”

“Sennheiser Pro Wireless System”

Shure SM7B

$439.00

“Shure SM7B”

DJI Mic 2

$199.00 · strongly positive

“So, for audio today, in addition to the fact that each camera is its own HDMI audio source, I am using the DJI Mic 2S. That's the microphone I'm using now.”

Elgato Wave Mic Arm Pro

positive

“So, it is a little bit shallow, but the Elgato Wave Arm Pro is just fine.”

“Sony Video Mic”

“Well, here this is the mono PDW200 and this is the Rode Pod Mic USB.”

“you are getting high quality 4K capture and you are still getting the full audio cuz you can hear right now I'm running the NT1 signature series into the Roadcaster video right there”

“And I do have these Mackie monitors, which work really, really well. I love these a lot.”

“Rode Headphones”

Final Cut Pro

“So, as I'm switching between these angles right now, I am actually making these cuts in Final Cut Pro, even though they are in 4K.”

RODECaster Pro II

cited in 2 videos

“And then of course, I've got my Rodecaster Pro II and then my MMO mouse and my Keychron keyboard, the Elgato Wave Arm Pro like I mentioned, which currently has the Earthworks Ethos on it, although that changes all the time.”

OBS

cited in 2 videos

“I have tried maxing out the UPS by like, you know, running really intense games and OBS simultaneously and having every peripheral and accessory turned on at the same time.”

Ecamm Live

“Ecamm Streaming Software”

“Now, one additional thing we can do since we are using the OBS cameras is I can go into Obsenter and actually click on the option for remote control interaction and then very much like Discord or Zoom, I can send Heather an invite link and she can join a session.”

Adobe Audition

“So, I'm currently recording into the Roadcaster like I mentioned, but I'm also recording into Adobe Audition on my MacBook Pro.”

Adobe Podcast Enhance

strongly positive

“using Adobe's enhanced speech from like their podcast software, which I have a whole video about. It's pretty phenomenal and works really, really well and can even take good audio and make it sound better just cuz it it's it's great.”

“And speaking of bamboo handy, I have been using this with bamboo software of course because that's you know to me that's the that's the reason I bought a bamboo printer was I I wanted the simple ecosystem of just you click the button and it works and it does the thing.”

Zoom

Mixed — said both good and bad

“I appreciate that you zoomed right over here as soon as I sent you the link because we are on Zoom right now.”

“ROYALTY FREE MUSIC ———————— •SoundMarket”

Bambu Lab X2D 3D Printer

“Bambu X2D (simple dual nozzle printer)”

Epidemic Sound

“Epidemic Sound (30 Day Free Trial)”

YoloDeck

strongly positive

“So that is where the yolo deck comes into play because what I can do here is I have this set up now where the top row are all of my inputs.”

“Tinkercad is extremely user-friendly, still teaches all the basic concepts of 3D design, and it's browser-based, so that way it works not only on Mac and PC, but even on things like Chromebooks, and I've used it on iPads, which you can use the Apple Pencil and draw stuff, super cool.”

Spotify

positive

“In my case, it took about a day or two, and then I could see in my Spotify for Creators dashboard that the episodes of my podcast with a video component now showed video being listed in Spotify.”

Buzzsprout

strongly positive

“So, jumping into my Buzzsprout dashboard and going over to directories, we can see that Apple Podcast has audio and video listed and Spotify has audio and video possible, but currently only audio enabled.”

“Now, I do have this little Thunderbolt cable here that's connected to my LG monitor, and that's if I ever want to use my MacBook, I basically just run that out the bottom here, connect the MacBook, and then that goes onto that monitor there.”

“And then of course, I've got my Rodecaster Pro II and then my MMO mouse and my Keychron keyboard, the Elgato Wave Arm Pro like I mentioned, which currently has the Earthworks Ethos on it, although that changes all the time.”

“And then of course, I've got my Rodecaster Pro II and then my MMO mouse and my Keychron keyboard, the Elgato Wave Arm Pro like I mentioned, which currently has the Earthworks Ethos on it, although that changes all the time.”

“Even though the desk does have the magnetic mat on it, I'm still using my Gutsy Aiden pad because it's a little nicer for mice.”

“I do have a separate video all about the Secretlab Atlas chair that I really love because it it kind of fixed a lot of important ergonomic problems for me”

“I've had my trusty Husky workbench desk since 2016, and I love [music] it.”

Secretlab MAGNUS Pro

$1,098.00 · strongly positive

“So, I started looking at Secretlab's desks, and they do have the Magnus Pro, which is pretty sweet. That's the one that I got.”

“So, I've got the white legs and then the white Nanogen desk pad.”

“Another thing that's been really really helpful, same with my P2S, is if you go into the Bamboo Handy app, there are free totally free online courses for their printers.”

Bambu Lab P2S 3D Printer

$549.00 · cited in 6 videos · Mixed — said both good and bad

“The reason that this printer is not in my office full-time, I have this and the H2C in a different room in a different setup and I have the P2S in here full-time is actually because of these windows.”

“I've had my Bamboo Lab X2D [music] since they sent it out at the time of release. So, it's been several months and I have 124 hours currently on the clock.”

“So, I decided I wanted to see what the difference would be making this print on my H2C because it has dual direct drive nozzles.”

“If other things show up, like Bamboo also sent out the A2L when that was released, which is super cool, then I can find places I found a middle school to donate that to.”

“It does come with the side rack and I just I've been using the HT which Bamboo sent over when they sent the H2C, but I've been using it here for the second nozzle just because it makes it a little bit less annoying to load”

“And I do think it is worth getting the AMS. I kind of say this when I talk about any of my printers, but if there's a combo with the AMS, this is absolutely worth it.”

“And mine were mostly Monoprice printers, because they were really affordable.”

“And my Prusa Mini, which, despite some issues, does still work, and it's it's just a cool, small little printer that it's it doesn't take up a lot of space to just kind of keep this around.”

“And then I did get a Prusa MK2S, and then eventually I got my Prusa Mini when that was released as well.”

“Simple Filament”

“What I ended up doing was getting a second AMS unit for this, and that was a really cool upgrade.”